EziTrimPlus

    Great for Skirting, Architraves, Reveals, Joinery, Furniture, Bathrooms and Kitchens (not exposed to constant wetting) and any interior finishing application that requires the great look of timber mouldings.
    • New and Improved
    • Defect Free
    • Light yet strong & stable
    • Wide range of profiles & dimensions
    • Easily worked - cut & drill
    • Easily painted – priming system ready to top-coat

    THE TIMBER

    EziTrim plus is manufactured from sustainable plantation grown Radiata Pine (Pinus radiata). Which has been milled, kiln dried and docked to remove all knots and visible Imperfections. This is then used to produce a fingerjointed/ laminated moulding, which has no defects, whilst also having the superior finish that you have come to expect from an industry leading product.

    THE GLUE

    The glue used in the fingerjointing and laminating process is designed to give EziTrim plus strength and Flexibility. The glue is moisture resistant and will withstand short term exposure to the moisture under typical indoor building conditions, i.e Kitchens and Bathrooms.

    PRIMER SYSTEM

    The unique feature of EziTrimplus mouldings is the priming process that creates not only good looks but a functional finish. The primer system involves three separate applications of different primer formulations which are hand sanded and buffed between coats. These primers create a finish which helps reduce the effects of raised grain and visible finger joints, that is both flexible and tough, with the added advantage of being ‘top coat ready’

    PAINTING

    All nail holes should be filled with an appropriate wood filler, and then sanded back to achieve a smooth surface (in accordance with manufacturers guidelines). All dust and dirt should then be wiped away before coating all bare timber with a wood primer. Once the surface has been prepared, simply apply your preferred top coat in accordance with paint manufacturers recommendations. EziTrimplus products can be painted with either acrylic, enamel or latex paints.

    DISPOSAL

    All timber off cuts should be disposed of in council approved landfill or incineration sites. It is not recommended to burn primed or painted timber in heaters and BBQ, both indoors and outdoors. This product or sawdust and shavings should not be used for mulch or animal bedding.

    APPLICATION

    Skirtings, architraves, jambs, reveals shelving joinery furniture bathrooms and kitchens (not exposed to constant wetting) ... any interior finishing application that requires great look of timber mouldings.

    • Profiles
    • CAD Drawings
    • Installation Guide

    DAR - Dressed All Around


    Bevel


    Bevel AS3


    Bevel Round


    Bullnose AS1


    Door Stop


    Flat Jamb Set


    Half Splay ASS 33mm


    Half Splayed AS4 25mm


    Lamb's Tongue


    Lining Board 302 & 321


    Pencil Round AS15


    Splayed ASB


    Victorian Colonial


    Quad


    Scotia


    Tri Quad


    There are no CAD drawings for this product.


    TOP